Installation Tips - Electric Dog Fence
Installing the wire of the electronic dog fence is simple. Bury the boundary wire underground approximately 1-2 inches deep. You can customize your containment system to protect your flowerbeds, shrubs and swimming pools. After the boundary wire is installed and the transmitter is turned on, the system is ready. The wire emits a radio signal. When this signal is received by the collar, stimulation will occur. As your dog enters the containment zone the collar will sound a warning tone without stimulation. If your dog does not re-enter the area contained by the electronic dog fence a low level of stimulation will occur. If he continues toward the boundary wire, the stimulation will steadily increase to prevent him from leaving the area.